[Description] [Features] [Specification] [Demo Software]

 [Converter List] [Match Card List] [Chip List]

bullet Reliable and cost effective
bullet Embedded CPU/RAM/Power supply for certified algorithm
bullet Universal converters for virtually all devices in one package
bullet Comprehensive device and package supports
bullet EPROM auto-identification
bullet Ideal for engineering applications
bullet Powerful functions and Windows interface
bullet Advanced MatchCard ( see also MatchCards List ) technology for system configuration
bullet Free software updates

In the engineering laboratory, you need a reliable programmer with an affordable price to meet your project and budget requirements. It sounds too good to be true! With the newly invented MatchCard technology on the AllWriter, the ideal has become a reality! On the AllWriter, System General can pass the saving to the customers by plugging in a MatchCard to program a particular device family. Each MatchCard includes additional circuitry to make the best use of the high quality pin drivers in the system! In addition, it also incorporates the electronic enhancement required to generate the cleanest environment and the best waveform quality. Therefore, the programming reliability is ensured.

You can't find a better solution than the ALLWriter in this class. Unlike other low cost solutions, the ALLWriter is equipped with all the key components required to generate Semi-houses certified environments. An embedded CPU ensures the correct programming timing and the pulse width of waveforms. The local power supply provides reliable programming power source. You can save time downloading your file through the high speed IEEE1284 parallel interface. The Windows software provides a powerful screen editor with commands to finish your design in one keystroke. The system supports over 20 file formats. Output files generated by Assemblers and Logic Compilers can be accepted. The programmable Vcc, down to 1.80V, assures that the ALLWriter will program the devices today and the cutting-edge green devices in the future! Like other System General programming systems, the updates are free!

MatchCards ( see also MatchCards List ) are small cards that need to be inserted in ALLWirter to enable device programming operations. Take DIP48 adapter for example, the default adapter that comes with ALLWriter shipping package, it has 12 MatchCards now to cover the supported devices in that package. Users can easily identify which MatchCard they should use when programming a specific device by checking the Device Selection screen in the Windows software. To program the Device in packages other than DIP would require package converters sitting on top of the DIP48 adapter plus the MatchCards that go with that specific converter. Each converter would have typically one or two associated MatchCards that work with them, respectively. Unlike the other competitors products in the market, the converters used on ALLWriter are essentially universal converters therefore highly shared among all the supported devices in the same package type. Customers will not be forced to spend money purchasing specific converters simply to serve one or two devices needs. This not only saves the hassles of managing bunches of converters but offers the lowest Total Ownership Cost (TLC) for users using ALLWriters.
bullet Embedded CPU.
bullet Local 110/220 Universal switching mode power supply.
bullet 32 meg bit RAM standard expandable up to 512 meg bits..
bullet High speed RS-232C serial interface up to 230,000bps.
bullet IEEE 1284 high speed parallel interface.
bullet Unique MatchCard for hardware configurations.

bullet Windows interface software

bullet EPROM, EEPROM, Flash EPROM.
bullet PALs, GALs, PEEL, PALCE, CPLD, EPLD, EEPLD.
bullet AMD/Vantis MACH, Altera MAX5000/7000, Altera Jam devices, Xilinx 95XXX EPLD, Lattice ispLSI, Philips CPLD.
bullet Over 200 Microcontrollers, including Motorola MC68HC705/711 families, Intel Microcontrollers, Philips Microcontrollers, Dallas Microcontrollers, Microchip PIC, Atmel 87/89 series Microcontrollers, WSI PSD devices.. etc.

bullet Optional converters to convert the programming signals from DIP to any other packages like PLCC, SOIC, PSOP, TSOP, VSOP and QFP. Only one converter is needed for virtually all devices in that package.
bullet Optional adapters to support devices in various packages. packages.

bullet Read, Program, Verify, Margin Verify, Illegal Bit Check, Blank Check, Erase, Secure.
bullet Task Manager for saving operation environments.
bullet File upload and download.
bullet EPROM Auto ID, Device insertion check.
bullet Three checksum modes: Byte sum, Word sum and CRC sum.
bullet Memory edit.
bullet Set / Split programming for Memory devices.
bullet Serial code programming for Memory devices.

bullet Binary, Standard HEX, ASCII-SPACE-HEX, ASCII-OCTAL, Motorola S ( S1, S2, S3 ), Intel MCS 86 HEX, Tektronix HEX, Extended Tektronix HEX, TI HEX, Xilinx HEX, Altera POF, Altera Jam, Standard JEDEC. Auto-Detectable.

bullet ALLWriter base unit ¡P 48-pin DIP adapter.
bullet Default MatchCards (depending on product packages)
bullet System Diskettes of Windows Software (programming drivers) with on-line manual.
bullet RS232 serial (9-pin) and parallel port (25-pin) cables
bullet Power cable

bullet Operating Voltage: 90 to 265 VAC
bullet Frequency Range: 47 to 63 Hz
bullet Power Consumption: 35Watt (max.)

bullet Dimensions: 29 (W) x 21 (D) x 5.6 (H) cm.
bullet Weight: 2.6Kg. (Base + DIP-48 Adapter)

Copyright (c) 2000 by System General. All rights reserved . Send all questions and comments regarding this site to E-MAIL

[ Su - Up ] [ Focus on ] [ Prodotti ] [ Rappresentate ] [ Offerte ] [ L'azienda ]

Inviate a sales@technolasa.com un messaggio di posta elettronica contenente domande sui prodotti di Vostro interesse o commenti su questo sito Web. Verrete ricontattati al più presto.
Ultimo aggiornamento il: 31 marzo 2003