|
[Adapter List] [HSP
Adapater] [Device Support List]
[Socket Boards List and Manual]
[Introduction]
[Description] [Features] [Specification]
 |
Modular-design
programming unit with up to 8
connections.
|
Unique
HSP adapters and Socket Boards design
for unparalleled high speed programming, writing
Intel 28F160B3 in 10 seconds.
|
Comprehensive
package and device supports on
each programming module.
|
Ultimate
choice for both laboratory and
production floor
|
Local
stand-alone and remote computer control operations.
|
High
speed RS-232C serial port interface up to 115200 bps
|
High
speed bi-directional parallel port interface.
|
Local
operation configurable with standard PCMCIA Flash memory card
|
Synchronous
and asynchronous operations supported.
|
Free
Software upgrade. |
| | | | | | | | |
Time is money, and
think of how much you can save when your programming operations have a zero wait
time. On the asynchronous Multi-Apro, each programming module is an independent
Universal system and the programming is executed concurrently on each module.
Therefore, as soon as a device is inserted in socket #1, the programming is
underway. By the time the nth socket is filled, socket #1 programming is
finished and ready for the next programming cycle. The proprietary HSP (High Speed Programming) technology,
implemented by the unique HSP
adapters and Socket Boards for various device packages, distinguishes Multi-APRO
in the speed of programming high density FLASH EEPROM.
The Multi-APRO sets
a new standard for a production programmer in terms of system configuration and
programming performance. It allows you to program different devices on different
sockets, and generates a "Device Set " for the assembly line. You can add or
remove the modules from the system without affecting the programming operation.
For system service or calibration, you can alternate sending back the modules
without interrupting the production. Both Windows and DOS software are available
for the PC remote control operation. A Job software can save the data file with
the programming parameters on the Flash Memory card for error-free local
operations. The advanced HSP
technology eliminates almost all the software overhead and programs devices in
high speed. High current resolution and accurate current sensing capability
allow for the correct programming of the most demanding Anti-Fuse devices. The
programmable system Vcc, down to 1.8 Volt, supports the next generation Green
devices with no hardware constraints.
|
Dedicated
CPU in both programming module and controller.
|
Embedded
switching power supplies in both module and controller
|
RAM
Standard 32 Mbits in module, expandable up to 128 Mbits.
|
High
speed RS-232C serial port interface up to 115200 bps.
|
High
speed bi-directional parallel interface.
|
Local
PCMCIA standard Flash memory system card.
|
Proprietary
HSP (High Speed programming) adapter
and socket boards for fastest high density flash memory programming.
|
| | | | | |
|
DOS
and Windows interface software |
|
The
stand-alone programming module is by itself a high-end universal programmer
supporting virtually all types of memory, microcontrollers and PLD
logic devices. |
|
Widest
collection of adapters and converters to support various device packages:
DIP, PLCC, SOIC, PSOP, VSOP, uBGA, etc.
|
Socket
boards for HSP adapters
covers PLCC32, PSOP44, TSOP32, TSOP40, TSOP48, TSOP56, VSOP32, VSOP40,
uBGA40 and uBGA48 packages. |
|
|
Stand-alone
and remote PC control operations
|
Read,
Program, Verify, Margin Verify, Illegal Bit Check, Erase, Secure.
|
Multitasking
operation management environment
|
Synchronous
and asynchronous operations supported for two or more programming
modules in connection
|
File
download and upload
|
EPROM
Auto ID, device auto-sensing and device insertion check
|
Configurable
PCMCIA flash memory card, system card or job card
|
Powerful
memory-editing functions
|
Set/Split
programming
|
Serial
code programming |
| | | | | | | | |
|
Binary,
Standard HEX, ASCII-SPACE-HEX, ASCII-OCTAL, Motorola S ( S1, S2, S3
), Intel MCS 86 HEX, Tektronix HEX, Extended Tektronix HEX, TI HEX,
Xilinx HEX, Altera POF, Altera Jam, Standard JEDEC. Auto-Identifiable.
|
|
Stand-alone
programming module with 40 pin DIP adapter
|
(will
become optional) Controller with 16 Mbits PCMCIA system card
|
System
software diskette
|
All
necessary cabling
|
User
manual
|
ESD
wrist strap |
| | | | |
|
Operating
Voltage: 90 to 265 VAC
|
Frequency
Range: 47 to 63 Hz
|
Power
Consumption: 60 Watt (max.) |
| |
|
Dimensions:
Controller: 15.5 (W) X 34 (D) X 11.5.0 (H) cm.
Module: 15.5 (W) X 34.0 (D) X 11.5 (H) cm.
|
Weight:
Controller: 3.0 Kg.
Module: 3.5 Kg (net) (Typical adapter: 0.5 Kg) |
|
Copyright (c) 2000 by System General. All rights reserved . Send all questions
and comments regarding this site to E-MAIL
|